Saturday, May 4, 2013

How to DIY Troubleshoot a Mercedes


1. Inspect the paintwork for damage. Scratches, dents and corrosion can all be indicative of greater damage elsewhere. Any scratch on the paint can be expensive, because Mercedes often used limited run paints (restricted to certain cars and years of manufacture). Paint needs to be repaired soon, as it can lead to early rust. Any dents in the body panel could mean that the Mercedes was in an accident and could have frame damage underneath. If there is corrosion in the panel then it is guaranteed that there is rust elsewhere, especially on the undercarriage.
2. Open the hood and inspect the engine. There should be no debris in the engine bay or radiator. If your Mercedes is a carbureted model, then inspect the barrel intakes for damage to the valves. Damaged carburetor valves can lead to irregular air-fuel mixes that can damage your piston or sleeves. If your engine is fuel injected, then inspect the fuel lines for leaks (pay special attention to the rubber hoses, as they have a tendency to become brittle with age). Inspect the power lines on the hybrid model for any damage (do not touch damaged ones). Call a Mercedes dealership to repair a hybrid model.
3. Turn the car on and listen to it idle. The hybrid Mercedes should not run the engine while the car is sitting still, only when under power. Non-hybrids should idle around 2000 rpm (if it idles higher than this, there may be a problem with the fuel-air mix). Watch the engine temperature. Even on a hot day, the engine should remain cool in idle.
4. Drive the Mercedes forward and listen for the engine. AMG models should roar when the throttle is pushed in, even at sedate speeds. Non-AMG models should be whisper quiet, even at highway speeds (if you hear the engine, then some of the noise isolation material has fallen off). Mercedes prides itself on providing quiet interiors on their regular cars. The car should easily absorb any bumps in the road. If the car rocks a lot then the shocks may be shot.