Monday, May 6, 2013
How to Check Differential Fluid Levels
1. Locate the differential housing. It is the lump on the axle in between the two tires, known as the pumpkin. If your vehicle has a differential cover, it will have a fill hole.
2. Locate the fill hole. On some models, it will be a square nut head sticking about 1/2 inch out of the cover itself, and on other models it will be an allen-style nut, recessed inside the cover.
3. Remove this plug, either using a crescent wrench or allen key, whichever your application requires.
4. Put your finger in the hole and feel for fluid. If filled correctly, the fluid should be almost to the bottom of the fill hole when on level ground. If you have to reach very far in, add some more.
5. Reinstall fill plug, but dont over tighten. They are designed with a lot of threads so the fluid wont leak, so there is no need to muscle these on. Just make it nice and snug.
